-
-
Product name: Double-row tapered roller bearing
-
-
Price: ASK
-
-
Post date: 2024-01-10
-
-
Stock Quantity:
-
Quantity:
Description:
Product features
The bearing is a separate type bearing, and the inner drawing assembly can be installed separately
from the outer ring of the national cone;
The outer ring and the inner assembly can be used in general mutual operation;
Double-row and four-row bearings have been determined according to user needs when the product
leaves the factory, and do not need users to adjust;
Especially suitable for bearing compound (radial and axial) load. The greater the contact angle, the
greater the applicability of bearing axial load.
Main areas
Product features
The bearing is a separate type bearing, and the inner drawing assembly can be installed separately
from the outer ring of the national cone;
The outer ring and the inner assembly can be used in general mutual operation;
Double-row and four-row bearings have been determined according to user needs when the product
leaves the factory, and do not need users to adjust;
Especially suitable for bearing compound (radial and axial) load. The greater the contact angle, the
greater the applicability of bearing axial load.
Main areas
Automobile, rolling mill, mining, metallurgy, plastic machinery and other industries.
Double-row tapered roller bearing can support radial and axial combined loads mainly based on radial loads, and can support two-way axial load cutting. There are spacer rings between the two inner rings of the bearing. By changing the barrier of the spacer rings, the purpose of adjusting the displacement can be achieved and the load is evenly distributed. This kind of bearing is suitable for medium and low speed occasions.
The outer ring (or inner drawing) of the double-row bearing is a whole. There are spacers in the middle of the small end faces of the two inner rings (or outer rings), which are adjusted by the thinness of the spacer diagram, and the pre-interference of the double-row tapered roller bearing can be adjusted by the thinness of the spacer.
The outer ring (or inner drawing) of the double-row bearing is a whole. There are spacers in the middle of the small end faces of the two inner rings (or outer rings), which are adjusted by the thinness of the spacer diagram, and the pre-interference of the double-row tapered roller bearing can be adjusted by the thinness of the spacer.